產品 > 網路商區 > 產品評論 > MFJ-266 > 傳送: HF/VHF/UHF 天線分析器
將產品資訊以 E-mail 傳送給您的朋友
MFJ-266 - HF/VHF/UHF 天線分析器       
 Hits 今天: 6 總計: 5045
參考評論 | 評論這項產品 |   產品 Q & A
MFJ HF/VHF/UHF 天線分析器, 可測頻率範圍 1.5-185* MHz plus 300-490MHz
請填妥下列表格, 我們將為您傳送上面的產品資訊給您的朋友
選取傳送信件的格式時, 要考慮到信件伺服器. 通常; 以瀏覽器為閱讀信件的伺服器就不接受 HTML 的格式

HTML 格式 | TXT 格式

寄件者:
收件者 E-mail:
主旨:
附加訊息:
　
MFJ-249,  MFJ-259B, MFJ-266, MFJ-269, MFJ-269Pro
Brand New Model !

MFJ 266 - Covers HF-VHF-UHF Bands, the 266 is another great addition to the MFJ antenna analyzer lineup.

Get all the basic RF-diagnostic functions you need and more with MFJ?s new easy-to-use MFJ-266 digital analyzer!

The MFJ-266 covers HF, VHF, plus UHF amateur and commercial frequencies with digital precision. It also displays SWR, Complex Impedance, and Impedance magnitude simultaneously -- all on the same easy-to-read LCD screen. Use it to measure Capacitance, Inductance, Field Strength, Frequency, plus generate test signals. You can also fine tune stubs, analyze coax, test baluns and RF transformers, and perform many other important RF-related tasks around the shack or on the road!

When it comes to simplicity and convenience, the new MFJ-266 is a clear winner. Not only is it easy-to-use, but fits comfortably in one hand for on-the-fly measurements on the bench or in the field. Here's the rundown of what this compact powerhouse can deliver:

Frequency Coverage
The MFJ-266 covers all bases -- from 160 Meters through 6 Meters, the FM broad-
cast band, Airband, 2 Meters, 70 cm, plus VHF/UHF commercial 2-way frequencies:

  • Band A: 1.5 to 2.7 MHz
  • Band B: 2.5 to 4.8 MHz
  • Band C: 4.6 to 9.6 MHz
  • Band D: 8.5 to 18.7 MHz
  • Band E: 17.3 to 39 MHz
  • Band F: 33.7 to 65 MHz
  • (gap*)
  • Band V: 85 to 185 MHz
  • Band U: 300-490 MHz
The velvet-smooth 10:1 vernier drive and solid state varicap makes fine tuning a breeze, and a built-in dial lock prevents accidental detuning while making measurements. Switched backlighting makes LCD screen easy-to-read in any light.

"> SWR, Impedance Magnitude, and Complex Impedance

In SWR Mode, the MFJ-266 reads SWR 1:1 to 9.9:1, Impedance Magnitude 10-500
Ohms and Complex Impedance (resistance and reactance). Best of all, it displays all three parameters simultaneously and operating frequency with one quick glance. No other low-cost handheld analyzer offers this! (Note: Z-mag and R+jX not displayed on UHF).

Capacitance and Inductance

Find values for unknown capacitance in pF or unknown inductance in uH quickly.
Measurements are made at RF frequencies rather than at the low audio frequencies used by many handheld L/C meters.

Frequency Measurement, Field Strength Readings

In Frequency-Counter Mode, MFJ-266 becomes an accurate 500-MHz counter with
a choice of 1-kHz or 100-Hz resolution. The counter mode also features a high-resolution digital field-strength meter for measuring the relative intensity of incoming signals. Together, these functions are extremely useful for checking the operation of oscillators, transmitters, as well as assessing the strength
of radiated signals from antenna arrays.

Built-in Interference Detection

In Frequency-Counter Mode, the MFJ-266 also tracks down powerful local signals
that can disrupt accurate SWR measurements. When picked up by an antenna under test, these signals may compete with the analyzer's internally generated test signal to make SWR readings appear artificially high. All handheld antenna bridges are subject to additive interference, but only the MFJ-266 can detect the presence of an offending signal, display its severity, and identify the operating frequency!

Powerful Signal Source

The MFJ-266 also functions as a tunable signal source, supplying about 2 Volts peak-to-peak across the entire tuning range. You can use this signal to drive mixers, low-power amplifier stages, or filters, and use it as a source for checking antenna patterns on a range. Add a step attenuator, (MFJ-762) and it becomes a low-level signal source for testing receivers and pre-amps.

Take it With You!

You'll especially appreciate the compact size and bantam weight of the MFJ-266
when up on a roof or perched on a tower. Also, push-button band switching lets you toggle across the spectrum with ease when tucked into cramped spaces.

User-Friendly Layout

MFJ-266 is ergonomic, with the antenna N-connector positioned on top of the case
and everything else carefully arranged and clearly marked on the front panel -- right in front of your eyes.

MFJ-266?s operating manual was professionally written and illustrated to help you understand and master every function quickly. It also includes a guide for ensuring accurate results and getting the most from the unit's advanced features. In the back, you'll find a one-page "Quick Guide" that reviews all controls and functions.

Many Instruments in One

Having the MFJ-266 is like owning several pieces of test equipment. You get a powerful wide-range signal source, Inductance/Capacitance meter, network analyzer, RF field-strength meter and a 500-MHz frequency counter all-in-one small package. The more you use it, the more uses you'll find for it!

Bullet Proof Construction

Features like the rugged aluminum case, solid-state band switching, robust internal construction, and solid-state LCD display ensure that minor bumps and drops won't faze your unit in the least. In fact, you can expect it to hold calibration and deliver reliable service for years to come.

Vital Statistics

MFJ-266 can be powered from eight internal AA alkaline batteries or from optional 12VDC/240 volt AC adapter. With the long storage life of alkaline batteries, your analyzer will always be ready to go when you are.

Compact 3 3/4W x 6 1/2H x 2 3/4D inches.
Weighs 1.32 lbs. Draws 30-mA in counter mode and 140-mA in analyzer mode.

">
　

TOP


Copyright © 2000 Rim-Tai Radio Communications Corp
All Rights Reserved.