無線電設備 > 無線電收發機 > ICOM > 業餘無線電收發機 > HF 機種 > IC-706MkIIG > 規格 >

IC-706MKIIG

This information is taken directly off of the ICOM IC-706MKIIG
brochure.


IC-706MKIIG SPECIFICATIONS

GENERAL

Frequency Coverage:
　
Receive
0.030 - 199.999 MHz*, 400 - 470 MHz*
　
Transmit
1.8 - 1.999 MHz*
3.5 - 3.999 MHz*
7.0 - 7.300 MHz*
10.1 - 10.150 MHz
14.0 - 14.350 MHz
18.068 - 18.168 MHz
21.0 - 21.450 MHz
24.89 - 24.990 MHz
28.0 - 29.700 MHz
50.0 - 54.000 MHz*
144.0 - 148.000 MHz*
430.0 - 450.000 MHz*
* Varies according to version
Mode: USB, LSB, CW, RTTY (FSK), AM, FM, WFM (Rx only)
Number of memory channels. : 107 (99 regular, 6 scan edges, 2 call channels)
Antenna connector : SO-239x2 (for HF/50 MHz and 144/430 MHz)/50
Power supply requirement: 13.8 V ± 15% (negative ground)
Frequency stability: Less than ± 7ppm from 1 min. to 60 min. after power ON. After that rate of stability less than ± 1 ppm/hr. at +25 °C (+77°F). Temperature fluctuations 0°C to +50°C (+32°F to +122°F) less than ±5 ppm.
Current drain: Transmit max. power 20 A; Receive standby 1.8 A, max. audio 2.0 A
Usable temperature range : -10°C to 60°C (14°F to140°F)
Dimensions (projections not included):
167(W) X 58(H) X 200(D) mm
6-9/16(W) X 2-9/32(H) X 7-7/8(D) in
Weight: 2.45 kg (5 lb 6 oz)
CI-V connector: 2 conductor, 3.5 (d) mm (1/8")
ACC connector: 13 pin


Transmitter

Output power:
　 SSB/CW/RTTY/FM AM
HF/50 MHz 5 - 100 W 2 - 40 W
144 MHz 2.5 - 50 W 2 - 20 W
440 MHz 2 - 20 W 2 - 8 W
Modulation system
SSB Balanced modulation
AM Low level modulation
FM Variable reactance modulation
Spurious emissions: Less than -60 dB (below 47.5 MHz: -50dB; 47.5 - 50 MHz: -50 to -60 dB; above 50 MHz: -60 dB)
Carrier suppression: More than 40 dB
Unwanted sideband: More than 50 dB
Microphone connector: 8 pin modular jack (600KEY connector: 3-conductor 6.35 (d) mm (1/4")
RTTY connector: 3-conductor 3.5 (d) mm (1/8")


Receiver

Receive system:
SSB/CW/AM/WFM: Double superheterodyne
FM : Triple superheterodyne
Intermediate frequencies

　 1st 2nd 3rd
SSB/AM-N/FM 69.0115 MHz 9.0115 MHz 0.455 kHz (FM only)
CW 69.0106 9.0106 -
RTTY 69.0105 MHz 9.0105 MHz -
AM/FM-N 69.0100 MHz 9.0100 MHz 0.455 kHz (FM only)
WFM 70.7000 MHz 10.7000 MHz -



Receive sensitivity (preamp on, except 4- - 4.5 and 8 - 9 MHz)

　 SSB/CW
10 dB S/N		 AM
10 dB S/N		 FM
12 dB SINAD		 WFM
12 dB SINAD
0.5 - 1.8 MHz - 13 µV - -
1.8 - 28 MHz 0.15 µV 2.0 µV - -
28 - 29.7 MHz 0.15 µV 2.0 µV 0.5 µV -
50 MHz band 0.12 µV 1.0 µV 0.25 µV
76 - 108 MHz - - - 10.0 µV
144/440 MHz band 0.11 µV 1.0 µV 0.18 µV -



Squelch Sensitivity (threshold)

SSB Less than 5.6 µV
FM Less than 0.3 µV



Selectivity (normal setting)

SSB, CW, RTTY More than 2.4 kHz/- 6 dB
　 Less than 4.8 kHz/ -60 dB
AM/FM-N More than 8.0 kHz/-6 dB
　 Less than 30 kHz/-36 dB
FM More than 12 kHz/-6 dB
　 Less than 30 kHz/-60 dB



Spurious and image rejection ratio:
SSB/CW/AM - More than 70 dB
Audio output power (at 13.8 V DC): More than 2.0 W at 10% distortion with an 8-ohm load
RIT variable range +/-9.99 kHz
PHONES connector: 3-conductor, 3.5 (d) mm (1/8")/8
EXT SP connector: 2-conductor, 3.5 (d) mm (1/8")/8

All stated specifications are subject to change without notice or obligation.

IC-706MKIIG SUPPLIED ACCESSORIES

Hand microphone
DC power cable
Spare fuses
RTTY key plug
Electronic keyer plug
ACC cable


IC-706MKIIG OPTIONS

IC-PW1 HF + 50 MHz 1 kW HF LINEAR AMPLIFIER
Covers all HF and 50 MHz bands, provides clean, stable 1 kW output. Automatic antenna tuner and compact detachable controller are standard. 2 exciter inputs are available. (An optional OPC-599 is required.)
AH-2b HF ANTENNA ELEMENT
For mobile operation with the AH-4. All bands between 7 - 54 MHz can be matched.
AH-4 HF+50 MHz AUTOMATIC ANTENNA TUNER
Covers 3.5 - 54 MHz with a 7 m (23 ft) or longer wire antenna.
AT-180 HF +50 MHz AUTOMATIC ANTENNA TUNER
Style and size are matched to the IC-706MKIIG.
PS-85 DC POWER SUPPLY
Output: 13.8 V DC (20 A max.).
MB-62 MOBILE MOUNTING BRACKET
For mounting the IC-706MKIIG main unit or the AT-180
MB-63 MOBILE MOUNTING BRACKET
For mounting the detached front panel.
MB-65 MOUNTING BASE
For mounting the detached front panel in a vehicle. The MB-63 is required.
MB-72 CARRYING HANDLE
Convenient for DX'peditions, operating in the field, etc.
OPC-581/OPC-587 SEPARATION CABLES
Provides separate operation. OPC-581: 3.5 m (11 ft); OPC-587: 5 m (16 ft)
SM-8 DESKTOP MICROPHONE
Equipped with 2 connection cables. (an optional OPC-599 is required.)
SM-20 DESKTOP MICROPHONE
High quality desktop microphone. (an optional OPC-599 is required.)
SP-7 EXTERNAL SPEAKER
Compact speaker for base station use.
SP-10 EXTERNAL SPEAKER
Heavy duty speaker for mobile use.
SP-12 EXTERNAL SPEAKER
Thin type speaker for mobile use.
UT-106: Provides AF DSP functions such as noise reduction and auto notch. Built in to some versions [like USA and Canada].
FL-100: 500 Hz/-6 dB (CW/RTTY nar.)
FL-101: 250 Hz/-6 dB (CW nar.)
FL-103: 2.8 kHz/-6 dB (SSB wide)
FL-223: 1.9 kHz/-6 dB (SSB nar)
FL-232: 350 Hz/-6 dB (RTTY/CW nar.)
CR-282 HIGH STABILITY CRYSTAL UNIT
CT-16 SATELLITE INTERFACE UNIT
CT-17 CI-V LEVEL CONVERTER
UT-102 VOICE SYNTHESIZER UNIT
OPC-599 MODULAR 8-PIN CABLE ADAPTER
OPC-598 ACC 13 PIN CABLE FOR AT-180
OPC-599 ACC 13 PIN CABLE ADAPTER
OPC-742 ACC 13 PIN CABLE