IC-910H* Specifications
原廠對規格得更改不經通知

此為原廠提供的原文規格, 如需中文規格請與我們聯繫 

General
  • Frequency coverage (USA version):
    • Rx,Tx: 144.000-148.000 MHz
    • Rx: 136.000-174.000 MHz (guaranteed range 144.000-148.000 MHz)
    • Rx, Tx: 430.000-450.000 MHz
    • Rx, TX: 1240.000-1300.000 MHz**
  • Mode: SSB, CW, FM, FM-N (FM-N is not available on 1200 MHz band)
  • Frequency stability: ±3 ppm (-10°C to +60°C)
  • Frequency resolution: 1 Hz
  • Number of memory channels: TBA
  • Operating temperature range: -10°C to +60°C; +14°F to +140°F
  • Power supply requirement: 13.8 V DC ±15% (negative ground)
  • Current drain (at 13.8 V DC)
    • Transmit
      • high: 23.0 A
      • low: 7.0 A
    • Receive
      • max. audio: 2.5 A
      • stand-by: 2.0 A
  • Dimensions:
    • 241(W) X 94(H) X 239(D) mm
    • 9 1/2(W) X 3 11/16(H) X 9 13/32(D) in.
  • Weight (approx.): 4.5 kg; 10 lb
  • Antenna connector
    • VHF: SO-239 (50 ohm)
    • UHF: Type-N (50 ohm)

 

Transmitter
  • Output power (continuously adjustable)
    • 144 MHz band: 5.0-100 W
    • 440 MHz band: 5.0-75 W
    • 1200 MHz band**: 1.0-10 W
  • Modulation system
    • SSB: Balanced modulation
    • FM: Variable reactance modulation
  • Spurious emission
    • 144, 440 MHz band: Less than -60 dB
    • 1200 MHz band**: Less than -50 dB
  • Carrier suppression: More than 40 dB
  • Unwanted sideband: More than 40 dB
  • Microphone connector: 8-pin connector (600 ohms)

 

Receiver
  • Receiver system:
    • VHF
      • SSB, CW: Single conversion superheterodyne
      • FM: Double conversion superheterodyne
    • UHF
      • SSB, CW: Double conversion superheterodyne
      • FM: Triple conversion superheterodyne
  • Sensitivity
    • SSB, CW: 0.11 µV (at 10 dB S/N)
    • FM: 0.18 µV (at 12 dB SINAD)
  • Squelch sensitivity
    • SSB, CW: 1.00 µV (at threshold)
    • FM: 0.18 µV (at threshold)
  • Selectivity
    • SSB, CW: More than 2.8 kHz/-6dB; Less than 4.2 kHz/-60 dB
    • FM: More than 15.0 kHz/-6dB; Less than 30 kHz/-60 dB
    • FM-N: More than 6.0 kHz/-6dB; Less than 18 kHz/-60 dB
  • Spurious rejection ratio: more than 60 dB
  • Audio output power (at 13.8 V DC): More than 2.0 W at 10% distortion with an 8 ohm load
  • RIT variable range
    • SSB, CW: More than 1.0 kHz
    • FM: More than 5.0 kHz
  • External speaker connector: 2-conductor 3.5 mm (1/8") 8 ohm connector X 2 (for main and sub bands)

 

Supplied Accessories
  • DC power cable
  • DIN plug
  • Spare fuses
  • Hand microphone (HM-12)

 

Options
Preamplifiers
  • AG-25/AG-35/AG-1200 WEATHERPROOF PREAMPLIFIERS
    External all-weather, mast mounting preamplifiers for compensating for coaxial cable loss. AG-25 for 144 MHz band, AG-35 for 440 MHz band, AG-1200 for 1200 MHz band.

Internal Units and Filters

  • FL-132/FL-133 CW NARROW FILTERS
    FL-132 is for the main band; FL-133 is for the sub band operation. Center frequency: 10.8491 MHz (FL-132); 10.9491 MHz (FL-133). Passband width: 500 Hz/-6dB.
  • CR-293 HIGH STABILITY CRYSTAL UNIT
    Frequency stability: ±0.5 ppm at 0°C to +60°C.
  • UT-102 VOICE SYNTHESIZER UNIT
    Provides audible confirmation of frequency and mode with a clear, electronically generated voice.
  • UT-106 DSP UNIT
    Provides AF DSP functions: noise reductions and auto notch filter. When two units are installed, the DSP function works for main and sub band simultaneously.
  • UX-910 1200 MHz BAND UNIT
    Allows all-mode operation on the 1200 MHz band.

Microphones and Speakers

  • HM-12 HAND MICROPHONE
  • SM-20 DESKTOP MICROPHONE
  • SP-7 EXTERNAL SPEAKER

Others

  • CT-17 CI-V LEVEL CONVERTER
  • MB-5 MOBILE MOUNTING BRACKET
  • MB-23 CARRYING HANDLE

 

* This device has not been approved by the Federal Communications Commission. This device may not be sold or leased, or offered for sale or lease until approval from the FCC has been obtained.

** An optional UX-910 1200 MHz band unit is required for 1200 MHz operation.

Top
TOP

Copyright © 2000
Rim-Tai Radio Communications Corp
All Rights Reserved.