IC-T7A

This information is taken directly off of the ICOM IC-T7A brochure.

	Frequency Coverage: VHF: Tx: 144-148 MHz Rx: 118-174 MHz UHF: Tx: 440-450 MHz Rx: 400-470 MHz
	Mode: FM (F3E)
	Acceptable power supply: 4.5 to 16 V DC
	Number of memory channels: 70 (60 regular, 4 pr. scan edges and 1 call/band)
	Tuning steps (kHz): 5, 10, 12.5, 15, 20, 25, 30 or 50
	Usable Temperature Range: -10°C to +60°C; +14°F to +140°F
	Antenna connector: BNC (50 ohms)
	Current Drain (at 13.5 V, typical): VHF: Tx (high): 1.2 A; Tx (low): 600 mA Rx (rated audio): 140 mA; Rx (power saved): 16 mA UHF: Tx (high): 1.3 A, Tx (low): 600 mA Rx (rated audio): 150 mA; Rx (power saved): 19 mA
	Dimensions (with BP-180): 57(W) x 122(H) x 29(D) mm, 2.25(W) x 4.81(H) x 1.125(D) in
	Weight: 320 g; 11.3 oz.

	Output power (at 13.5 V): VHF: 4 W or 500 mW UHF: 3W or 500 mW
	Modulation system: Variable reactance frequency modulation
	Maximum frequency deviation: ±5 kHz
	Spurious emissions: Less than -60 dB
	Microphone impedance: 2000 ohms

	Receive system: Double conversion superheterodyne
	Intermediate frequencies: 1st: 45.15 MHz; 2nd: 450 kHz
	Sensitivity (typical): Less than 0.16 µV (for 12 dB SINAD)
	Squelch sensitivity: Less than 0.16 µV
	Spurious and image rejection ratio: VHF: More than 60 dB UHF: More than 50 dB (except 1/2 of image frequency)
	Audio output power (at 13.5 V): More than 250 mW (10% distortion with an 8 ohm load)
	Audio output impedance: 8 ohms

	BP-170 BATTERY CASE: R6 (AA) batteries x 4
	BP-171 BATTERY PACK: 4.8 V, 700 mAh
	BP-172 BATTERY PACK: 4.8 V, 950 mAh
	BP-173 BATTERY PACK: 9.6 V, 650 mAh
	BP-180 BATTERY PACK: 7.2 V, 600 mAh
	BC-79 + AD-56 DESKTOP CHARGER and ADAPTER: Rapidly charges battery packs BP-173 or BP-180. Both AC and DC can be used to power the charger.
	CP-12/L CIGARETTE LIGHTER CABLE WITH NOISE FILTER: Allows you to operate the transceiver through a 12 V cigarette lighter socket. The connected battery pack is charged simultaneously (12 to 16 V DC necessary).
	OPC-254/L DC POWER CABLE: Allows you to operate the transceiver through a 4.5 to 16 V external DC power supply. The connected battery pack is charged simultaneously (12 to 16 V DC necessary).
	HM-46 SPEAKER-MICROPHONE: Compact, lightweight. Equipped with an earphone jack.
	HM-54 SPEAKER-MICROPHONE: Durable, full-sized.
	HM-75A SPEAKER-MICROPHONE: Allows you to remotely select memory channels, operating frequency, etc. Simple remote and normal remote are selectable.
	HS-85 HEADSET: Allows you hands-free operation. Includes VOX, PTT, "one-touch PTT" (TOT).
	SP-13 EARPHONE: Provides clear audio in noisy environments.
	MB-30 MOBILE MOUNTING BRACKET: For mounting the transceiver on the inside door panel of a vehicle.
	BC-110A/D/V WALL CHARGER: Regularly charges battery packs. The same as supplied with some versions.
	CS-T7 CLONING SOFTWARE: Provides quick and easy programming of items, including memory channels and set mode contents, for local repeater frequencies, etc.
	LC-136 CARRYING CASE: For use with the BP-170, BP-171 or BP-172.
	LC-137 CARRYING CASE: For use with the BP-173 or BP-180.