產品
>
網路商區
> 產品評論 >
ALS-500MX >
傳送: 500W移動式功率放大器13.8V
將產品資訊以 E-mail 傳送給您的朋友
ALS-500MX - 500W移動式功率放大器13.8V
Hits 今天: 5 總計: 5556
參考評論
|
評論這項產品
|
產品 Q & A
Ameritron mobile no tune Solid State Amplifier
請填妥下列表格, 我們將為您傳送上面的產品資訊給您的朋友
選取傳送信件的格式時, 要考慮到信件伺服器. 通常; 以瀏覽器為閱讀信件的伺服器就不接受 HTML 的格式
HTML 格式 |
TXT 格式
寄件者:
收件者 E-mail:
主旨:
附加訊息:
-
Extremely quiet - quiet low speed, low volume fan stays off and silent until temperature rises.
-
Output Power - 500 watts PEP, 400 Watts CW
Continuous Coverage - 1.5 to 22 MHz 10/12 Meters with easy to install optional kit.
-
Load Fault Protection - disables and bypasses amplifier if antenna has excessively h high reflected power or if bandswitching is set lower than exciter frequency - virtually eliminates damage because of operating error; has Load Fault LED indicator.
-
Thermal Overload Protection - disables and bypasses amplifier if temperature is excessively high; automatically resets when temp drop to safe level Thermal Overload LED indicator.
-
Excellent harmonic suppression - multiple section output network, push-pull output circuit has excellent harmonic suppression.
-
DC current meter lets you monitor collector current.
-
ON/OFF Switch - bypasses amplifier for "barefoot" operation without having to disconnect high current power supply cables.
-
Remote ON/OFF Control - lets you remote control ON/OFF function for out-of-the-way mounting of amplifier.
-
Exciter Drive - less than 100 watts input gives full output.
-
Power Supply Requirements - requires 14 VDC at 80 amperes peak current for PA transistors and separate line for 14 - 16 VDC at 4 amperes for control and bias circuits. Made in USA.
">
TOP
Copyright © 2000
Rim-Tai Radio Communications Corp
All Rights Reserved.
