MFJ :
MFJ-915 RF Isolator
 |
| Hits 今天: 1 總計: 3306 |
 |
 參考評論 (0)
|  評論這項產品 | 
產品
Q & A |
 以電子郵件傳送 |
列印 |  SKYPE |
|
 放大影像
|
| 請參考其它與 MFJ-915 同類的產品 (不分廠牌) |
 |
無線電器材 |
|
|
|
產地 >
主機 : . Call
| 附件 (電纜線, 文件, 包裝..) :
. 同主機產地 |
|
|
| 供貨狀況 |
|
本項商品若是由多件產品所組成的套裝商品, 則各項物件組裝之後即可出貨. 若其組件沒有庫存的情況下, 配合商品的物流寄送下, 接受訂單後, 一般預計 3 至 4 天內可出貨. 若組件或產品本身為原裝進口商品, 則適空運及廠商供貨情況, 可能需費時一至數個星期才能交貨.
若您訂購這項商品時, 我們將會進一步與您聯絡交期. 確定產品的確能如期交貨之前, 我們不會向您請款.
|
|
特價:
NT$1,365.00
(含 5% 營業稅)
|
|
|
|
The MFJ-915 RF Isolator is a 1:1 Current Balun designed to be placed in line with a 50-Ohm coax. The RF Isolator is effective from 1.8 to 30 MHz. It was designed to improve the performance of all amateur stations, fixed or mobile.
MFJ-915 will reduce or eliminate stray RF often found on coax. This stray RF can cause burns and other problems with electronic equipment in ham-shacks and vehicles. Stray RF also results in a loss of radiated power from the antenna, which will lead to a great reduction in signal strength. Use of the MFJ-915 will increase the efficiency of all amateur stations.
It𠏋 made up of 50 Ferrite Core Beads, placed onto a 13-inch piece of RG-303 coax. The coax and SO-239 connectors have Teflon(R) for maximum insulation and extended life of the product. The RF Isolator is enclosed in schedule 40 PVC pipe for maximum strength and protection |
|
產品說明書
 下載使用手冊 (PDF)
|
|
|
|
|
| 特價: |
NT$1,365.00
(含 5% 營業稅)
|
|
|
| 供貨狀況 |
|
本項商品若為多件產品所組成的套裝組合商品, 則各項物件組裝之後即可出貨. 若其組件沒有庫存的情況下, 配合商品的物流寄送下, 接受訂單後, 一般預計 3 至 4 天內可出貨. 若組件或產品本身為原裝進口商品, 則適空運及廠商供貨情況, 可能需費時一至數個星期才能交貨.
若您訂購這項商品時, 我們將會進一步與您聯絡交期. 確定產品的確能如期交貨之前, 我們不會向您請款.
|
|
|
|
